Incorporated in the year 1976 as a Small Scale Industry to cater the needs of M/s. Bharat Heavy Electricals Limited, High Pressure Boiler Plant, Tiruchirappalli.
As a Vendor to M/s. Bharat Heavy Electricals Limited, Indo Fab had manufactured components such as Boiler supporting structures, Structural members like Floor beams, Horizontal and Vertical Bracings, Flue gas and Air ducts (Square, Circular and Transition), Wind boxes, Spiral casings, etc.,
In 1983, Indo Fab had added the facility of Submerged Arc welding and Gantry crane of 40T Capacity to a span of 12 Metre. This facility was added to undertake orders for the manufacture of Ceiling Girders.
With the added facility Indo Fab had fabricated Ceiling Girders to more than 20 Power Boilers of 110 MW and 210 MW executed by M/s.Bharat Heavy Electricals Limited, Tiruchirappalli
In 1986, Indo Fab had an opportunity to fabricate Ceiling Girders for 500 MW Power Boilers. The company had fabricated and supplied Ceiling Girders to M/s.National Thermal Power Corporation Limited, for their Ramagundam Super Thermal Power Station through M/s. Bharat Heavy Electricals Limited – Tiruchirappalli.
During 1988 a special purpose Gantry crane with a safe working load of 40T with 30m span was added in a Short spell of 3 months to meet the requirements of M/s. Bharat Heavy Electricals Limited, Tiruchirappalli to undertake fabrication of box type Ceiling Girders of Two Tier Design involving total Single Stage Trial Assembly of about 300T of Heavy fabrication.
Indo Fab had fabricated and supplied Ceiling Girders for all the four units of 210 MW Boilers supplied to M/s. Neyveli Lignite Corporation Limited by M/s. Bharat Heavy Electricals Limited, Tiruchirappalli. Inprocess control and Dimensional conformance were carried out under the direct supervision of NLC Engineers and M/s.EVT - West Germany.
Shop assembly of Boiler Supporting columns Floor Beams Vertical and Horizontal bracings for all the four Boilers of NLC under EVT Inspection involving 4000T were executed spread over to a period of 24 months.
Ceiling Girders of Two Tier Design for TALCHER 500 MW Boiler were fabricated by Indo Fab. Maximum weight of Single Girder is 102T. This Ceiling Girder was fabricated and supplied through M/s.Bharat Heavy Electricals Limited, Tiruchirappalli meeting the Quality requirements of M/s.National Thermal Power Corporation Limited.
With the experience gained in the field of fabrication Indo Fab was one among the short listed firms to undertake fabrication of Boiler Pressure parts and Nuclear Sub-Assemblies. Plate formed pipes were fabricated and supplied under the Inspection of Chief Inspector of Boilers, Tamil Nadu meeting the code requirements of Indian Boiler Regulations-1950.
Indo Fab is one among the successful ancillary units of M/s.Bharat Heavy Electricals Limited, Tiruchirappalli supported with the Technical Assistance of the Parent unit (BHEL). Indo Fab had fabricated and supplied the most critical Assemblies like SA12, SA13 and SA34 for the Nuclear Power Projects meeting the International Code Requirements executed by M/s.Bharat Heavy Electricals Limited, Tiruchirappalli.
Indo Fab is one of the approved source to M/s.Bharat Heavy Electricals Limited for the fabrication and supply of Fan Casings to their Trichy and Ranipet units. Indo Fab fabricated and supplied Fan casings for 110 MW, 210 MW and 500 MW Boilers to various Power Projects executed by M/s.Bharat Heavy Electricals Limited Tiruchirappalli.
Indo Fab fabricated and supplied DREDGERS to M/s.Tebma Engineering Private Limited, Chennai meeting the Quality requirements of M/s.LRIS.
Indo Fab also executed Job Orders for the part processing of Heat Exchanger components to M/s.Bharat Heavy Electricals Limited under third party Inspection organisation like M/s.EIL and M/s.LRIS.
Indo Fab successfully executed a major order from M/s.Indomag Steel Technology Limited, New Delhi a company jointly promoted by Mannesman Demag, Germany for the supply of Steel Plant Equipments like Scrubber (Gas Cleaning Systems), Make-up Water Tank, Scrap Box and Water Storage & Expansion Vessel for M/s.Jindal Vijayanagar Steel Limited. Value of the single order executed is Rs.125 Lakhs excluding Taxes and Duties. Scrubber and Make-up Water Tank were manufactured to IS-2825 Class 2.
Scrubber for the Gas cleaning system and Make-up Water Tank were manufactured meeting the quality requirements of M/s.Metallurgical and Engineering Consultants India Limited.
Water Storage & Expansion Vessel was manufactured to IS-2825 Class 1 requirements under the Inspection of M/s.LRS, Welders were qualified to En 287 & En 288, evaluation and acceptance of Radiography and Ultrasonic Testing were as per A.D.MERKBLATT – HP 5/3.
M/s.IndoMag Steel Technology Limited placed a Second order for the supply of 5 Numbers of Scrap Boxes and one number of Traverse to be supplied to M/s.Jindal Vijayanagar Steel Limited under M/s.MECON Inspection.
Indo Fab bagged another order from M/s.IndoMag Steel Technology Limited, for the supply of Nitrogen Tanks for Lance cooling equipment and for Hot Metal De-sulphuraisation Plant to be supplied to M/s.Jindal Vijayanagar Steel Limited. The Vessels were manufactured to IS-2825 Class 1 requirements under the Inspection of M/s.LRIS. Welders were qualified to En 287 & En 288. evaluation and acceptance of Radiography and Ultrasonic Testing were as per A.D.MERKBLATT - HP 5/3.
Indo Fab had manufactured and supplied Electrolytic pots to M/s.Madras Aluminium Company Limited, Mettur, Salem on a turnkey basis. Value of the order Rs. 314 Lakhs comprising of 530T of finished products. The equipments were supplied, Erected and commissioned within a short span of 120 days.
Indo Fab also bagged another order from M/s.Bharat Heavy Electricals Limited, Tiruchirappalli for the fabrication and supply of 140 T LD Convertor Vessel an order placed by M/s.Indomag Steel Technology Limited. Work involved is optimising the Top cone, upper shell in two halves. Fit-up and welding the Cooling arrangements on the Top cone.
Trail Assembly of two halves of the cone, Two halves of the upper shell, Two halves of the bottom Shell and Trial Assembly of Top cone with upper shell and upper shell with the bottom shell. Welders were specially qualified by Mannesman Demag and entire work was executed under the Inspection of M/s.Bharat Heavy Electricals Limited, M/s.Indomag Steel Technology Limited and M/s.Mannesman Demag, West Germany. The Convertor Vessels were supplied to M/s.Jindal Vijayanagar Steel Limited.
In addition to the Convertor Vessel Pedestals for Drive side and Non Drive side were also fabricated and supplied.
Indo Fab had also executed site fabrication and erection of 1400 T through associate company under Inspection of M/s.Engineers India Limited to M/s.Madras Refinery Limited, Chennai for their Wax Plant Expansion Project.
Executed an order from M/s.TI Metal Section for Fabrication and supply of Building Structures, Crane Beams etc., meeting the Specification of M/s. Butler/U.S.A.
In addition to Shop fabrication Indo Fab fabricated and erected 2000T of Industrial structures to M/s.Bharat Heavy Electricals Limited, Tiruchirappalli for their Seamless Steel Tube Plant at Tiruchirappalli.
Based on the past performance M/s.Bharat Heavy Electricals Limited, Tiruchirappalli had awarded the work of High Bay Expansion Work on Indo Fab. Work consisting of Site Fabrication and Erection of Industrial Building Structures, columns, Crane Beams and other works about 1700T. Entire work is being carried out under M/s.LRIS Inspection.
Indo Fab fabricated and supplied Crane Bridge (EOT) and Gantry Crane Bridge to M/s.Bharat Heavy Electricals Limited, Tiruchirappalli an order placed by Maintenance & Services (Cranes) Department.
M/s. Kinetics Technology India Limited – New Delhi a Mannesman Company placed an order for a value of Rs.134 Lakhs for the manufacture and supply of Wall Panels, Structurals and Chimney Weighing around 300 MT for the Reformer Package for DHDS (Diesel Hydro De-sulphurisation) Project of M/s.Cochin Refinery Limited – Kochi under M/s.EIL Inspection.
Indo Fab bagged another order from M/s.Kinetics Technology India Limited – New Delhi for the manufacture and supply of Reformer Package components to M/s.Madras Refinery Limited, Chennai under M/s.EIL Inspection.
Indo Fab bagged an order from M/s.Bharat Heavy Plate & Vessels, VISAKHAPATNAM for the Erection, Welding, Post Weld Heat Treatment and Hydrostatic Pressure Testing of 3 Nos of 150 MT Capacity LPG Bullets and One number of Horton Sphere 18M Dia. 3000 Cu mtr 3 capacity at Perundurai near Erode for M/s.Indian Oil Corporation Limited.
The firm also executed the Fabrication and Trial Assembly of Ceiling Girder for the JOJOBERA 2x120 MW Boilers for M/s.Bharat Heavy Electricals Limited, Tiruchirappalli under TCE Inspection.
Regular fabrication and trial assembly of 500MW ceiling girder Assembly.
The firm had also fabricated one number of Amine Regenerator awarded by M/s.Bharat Heavy Electricals Limited, Tiruchirappalli to M/s.Hindustan Petroleum Corporation Ltd., Vizag for the Hydro Carbon and Related Projects by L&T under Inspection by M/s.BVIS & M/s.EIL.
The Company have manufactured and supplied One no of Expansion Vessel to M/s. Jindal Vijayanagar Steel Limited for their 2x2 BOF Operation under LRS Inspection. The Firm also bagged an order from M/s.Bharat Heavy Electricals Limited, Tiruchirappalli for the Fabrication and Erection of Industrial Building Structures including Civil Work and the same is under execution. The Company also executed an order from M/s.R.J.Associates, Mumbai for the Manufacture, Supply and Erection of Structures and Ducts for M/s. Sterlite Industries, Thoothukudi.
Indo Fab bagged an Turn-Key order from M/s. IOC, Chennai for their CAPEX-VISION 2000 Detail outlet job (Civil, Mechanical, Electrical & Instrumentation) in madurai division.
The Company had also Supplied, Fabricated, Erected & Tested 2 Nos Sulphuric Acid Cone Roof Storage Tank and allied Pipeline work for M/s. Sterlite Industries, Tuticorin.
The company had also site optimized and welded, tested 119 Nos Pile Pipes weighing 3454 MT for CPCL Oil Jetty Project at Nagapattinam under EIL Inspection by an order from M/s. BHEL Piping Center, Chennai being a single order value of Rs. 89 Lakhs conversion work.
The company had manufactured 1 No Ceiling Girder for Talcher Thermal Power Station under NTPC Inspection by an order from BHEL, Trichy.
Supplied, Fabricated & Erected Fluoride and Alumina Hoppers for Point Feeding system in the Technology up gradation M/s. Madras Aluminum Company Limited, Mettur.
Presently the company is engaged the manufacture of 1 No Ceiling Girder for Mejia Thermal Power station by an order from BHEL, Trichy.
In addition to the approval from various public sectors, the company have obtained the certificate of Registration BSEN.ISO 9001:2000 from National Quality Assurance for the manufacture and supply of Boiler Components, Heavy fabricated structures, wind mill structures and other Industrial applications.
The Shop is approved by the Chief Inspector of Explosives and IBR for the manufacture of Pressure Vessels, Pressure parts, process pipelines etc. Also approved by M/s.Indian Oil Corporation Limited, for the manufacture and supply of LPG Bullets.
The firm has got a good exposure to the manufacturing codes like AWS D-1.1, ASME, BS 5500 and can execute orders for the manufacture, Supply and Erection of Industrial and Boiler Structures, Pressure Vessels and Heat Exchangers under any third party inspection organizations.